Rebecca Shortt, Engineer – Water Quantity, OMAFRA – Simcoe

Drip irrigation of tomatoThe month of May and the first 2 weeks of June have been extremely dry (<40% of avg rainfall). The areas of Niagara and Peterborough are of particular concern because of lengthy dry conditions through the entire spring (since March 1st) and stretching back through 2015.

This is a critical period for most horticultural crops where the fruit or flesh development is occurring as well as rapid vegetative growth.

I know I need to irrigate; how much do I apply?

The websites (free but you must register) or provide evapotranspiration (ET) measurements on a daily basis for some of southern Ontario. Use the ET multiplied by a crop factor (Kc) to get the depth of water you need to apply. Remember that the crop factor reflects the “thirstiness” of the crop and the amount of canopy. Earlier in May the canopy was very small so the water use is much lower; we are now approaching canopy closure on most crops. Some of our soil moisture monitoring in fruit trees in Niagara has shown a big increase in water use since June 16. If you are not sure what crop factor to use, estimate the Kc by considering the % canopy coverage (full row closure is typically 100% or a Kc of 1.0).

Note that before full canopy/flowering/sizing the crop water demand may be lower but this doesn’t mean lack of water won’t affect yield/quality. Before full water demand, carefully calculate the crop needs and apply the small amounts regularly. For overhead irrigation the water demand should be applied once a week or, when the roots are small, split into 2 applications per week. For drip irrigation water should be applied daily or every other day (some deep rooted crops could be stretched to 2 times per week).

For overhead irrigation, use a rain gauge in the field to make sure you applied what you think you applied.

Crop Factors for Vegetables (Kc)

Bare soil 0.2
Cabbage, Cauliflower 0.4 From seedling or transplanting to start of heading
0.7 From start of heading to full row fill
1.0 Remainder of crop
Sweet corn 0.4 From seedling to 1st showing of tassel in whorl
0.7 1st tassel to silking
1.0 Remainder of crop
Potatoes, Tomatoes, Peppers 0.4 From seeding or transplanting to 1st flower
0.7 From 1st flower to maximum row fill (tomatoes) or tuber sizing (potatoes)
1.0 Remainder of crop

Crop Factors for Fruit Trees (Kc)

Month Permanent sod with herbicide strip Clean cultivation plus cover crop
Non-bearing Mature Non-bearing Mature
April 0.2 0.2 0.2 0.2
May 0.3 0.3 0.3 0.3
June 1-15 0.3 0.4 0.3 0.4
June 16-30 0.5 0.6 0.4 0.5
July 0.6 1.0 0.5 0.65
August 0.6 1.0 0.5 0.65
September 0.5 0.95 0.3 0.5

Tomato example in Leamington

ET June 15-21 = 33mm

Kc = 0.7 (from 1st flower to maximum row fill )

ET x Kc = 33mm x 0.7 = 23mm = 0.9 inches

Potato example in Woodstock

ET June 15-21 = 30mm

Kc = 0.7

ET x Kc = 30mm x 0.7 = 21mm = 0.8 inches

Apple (mature with sod) example in Leamington

ET June 15-21 = 33mm

Kc = 0.8 (I’m using a higher Kc because I think we’re closer to full canopy than the chart value would suggest)

ET x Kc = 33mm x 0.8 = 26mm = 1.0 inches

For more information

OMAFRA Irrigation Resources

OMAFRA Irrigation Videos

Irrigating Vegetable Crops

0 comments on “Irrigation update

Leave a Reply

%d bloggers like this: